• Material: 7075 Aluminum
• Coating: Matte Black Hardcoat
• Overall Length: 1.780"
• Overall Width: 1.1"
• Overall Height: .335"
• Radius: .468"
• Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
• Red Dot Fitment: Trijicon RMR, Holosun HS507C

.468" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625". This should fit barrel/receiver diameters from .936"-1.350". .670" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625" which should fit the receiver ring on the following guns: Common Applications for .670" bottom radius mount: Shotgun:

• Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws)
• Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws)
• Browning A-Bolt 12 Gauge
• Savage 210
• Savage 212
• Savage 220
• Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws)
• Winchester 1300
• Winchester SXP

Rifle:

• Remington 700, 722, 40x
• Remington 783
• Remington 710/770
• Remington xp 100
• Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws)
• Savage arms centerfire models
• Winchester 70