Skip to Site Content Skip to Footer
Log In
430108502_1W.jpg
430108502_1W.jpg

Lee Bullet Sizing Kits are the fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container. Complete for one size. Press and bullet lubricant are sold separately.

Special note: Intended for use on single stage presses only. The push through Punch is used in place of a Shell Holder in the Ram.

Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary.

To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox, push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on.

For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.

Bullet Weight (Grains):
Bullet Caliber:
Item Height (Inches):
3.400
Cavities:
Caliber:
Bullet Style:
Item Weight (lbs):
0.646
Item Length (Inches):
5.600
Model Number:
Color:
Steel
Quantity:
1
Item Width (Inches):
3.400
Diameter (in):
0.3290
Material:
Aluminum

Prop 65 restriction:
WARNING: Melting and casting lead objects will expose you to lead, known to the State of CA to cause reproductive harm and cancer. www.P65Warning.ca.gov
Shop All ED BROWN

.329" Diameter Classic Bullet Size Kit

Your Price
$2,299.99 *
Crow # 430108502
MFR # 90934
UPC 734307909345

430108502_1W.jpg
430108502_1W.jpg

Iowa Warehouse
North Carolina Warehouse
Upload FFL Documentation
Something went wrong
The document was updated successfully.