FORSTER NECK REAMERS
Forster Inside Neck reamers are designed to remove excess brass from the inside of case neck walls. The Forster Neck Reamer is manufactured from high grade, wear-resistant tool steel and ground .0025" to .003" over the maximum bullet diameter. Constructed with a staggered tooth design so that brass is cur smoothly and without chatter. Neck reaming should only be performed after the cases have been fired with a full load and before the neck or full length sizing operation. Wall thickness can be measured with a tubing micrometer, but a simpler test for excess brass in the neck area is to slide a bullet into a fired, unsized case neck. If you feel interference, the neck should be reamed or outside neck turned.
Available options:
100203302
,
749002985
,
749002986
,
749002987
,
749002988
,
749002989
,
749002990
,
749002991
,
749002992
,
749002996
,
749002997
,
749002999
,
749003001
,
749003010
,
749003029
,
749003030
,
749003034
,
749101728
,
749002995
Caliber (Maximum):
Caliber (Minimum):
Caliber:
Diameter (in):
0.2590
Model Number:
.257 Caliber (.259"-.2595")
Quantity:
1
Kit:
Shop All ED BROWN
Inside Neck Reamer .257 Bullet Diameter (.259-.2595)
Your Price
$2,299.99 *
Crow # 749002999
MFR # NR1257
UPC 757253004902
Iowa Warehouse
North Carolina Warehouse