Skip to Site Content Skip to Footer
Log In
l_100060365_1.jpg
l_100060365_1.jpg
Rebate

RCBS Coated Neck Bushings are interchangeable to let the reloader select a bushing that gives precisely the right amount of tension on the bullet when using RCBS Gold Medal Match neck sizing dies. These bushings have a Tungsten Disulfide (WS2) anti-friction coating, so they do not require use to traditional case lube.

  • Self-centering for proper alignment with case neck
  • For best results, use of high-end brass with consistent neck thicknesses
  • For use ONLY with RCBS Gold Medal neck sizing dies

RCBS recommends having neck bushings one to two sizes above and below your target diameter (see note below). RCBS Coated Neck Bushings are a small but critical component in loading extremely consistent-shooting ammo with your Gold Medal Match sizing dies. Brownells Gun Techâ„¢ Tip: There are two ways to select the steel neck bushings you need: (1) Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension. (2) You can also measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet and subtract .002" to .003".

Die Style:
Cartridge:
Diameter (in):
0.2040

Prop 65 restriction:
Lead
Shop All ED BROWN

0.204" Tungsten Neck Sizing Bushing

Your Price
$2,299.99 *
Crow # 100060365
MFR # 81719
UPC 076683817198

l_100060365_1.jpg
l_100060365_1.jpg
Rebate

Iowa Warehouse
North Carolina Warehouse
Upload FFL Documentation
Something went wrong
The document was updated successfully.