The new Precision Resizing Dies are the culmination of years of shooting and reloading precision rifle cartridges. The design and execution of the Precision Resizing Dies are pure Short Action Customs innovation and demand for excellence

Each Precision Resizing Die is designed to size the cartridge shoulder a minimal amount to prevent over working the brass, yet allow for proper feeding and function. The base of the cartridge is sized more than a standard die to ensure brass that is “fired and tired” can still be used with out any clicking or sticky bolt close due to enlarged base diameters. Important details such as neck/shoulder radius and neck diameters are carefully derived from the parent cartridge’s body geometry ensuring that sized brass has the parent cartridges true geometry.

• New Material offers increased surface finish and core strength compared to 416 Stainless and 12L14.
• New Heat Treat offers a surface hardness up to 80 Rockwell on the C scale, yet offers increased lubricity compared to standard heat treat and Salt Bath Nitriding/Melojnite.
• Die bodies are machined in two operations and are extremely true.
• Uses standard 7/8 x 14 external threads to secure to any standard reloading press.

These dies use SAC's Neck/Shoulder Sizing Bushings. Since the Bushings control sizing of the Neck and Shoulder, these die bodies may work with similar cartridges within the same family. For example, the Creedmoor Die Body can be used for 22, 6mm, 25, and 6.5mm Creedmoor cartridges depending on the Neck/Shoulder Bushing purchased.

Neck/Shoulder Bushings must be purchased seperately.