Skip to Site Content Skip to Footer
Log In
430109155_1W.jpg
430109155_1W.jpg

A full-length sizing die is designed to resize the entire length of the cartridge case, not just the neck. Unlike neck-sizing dies, which only resize the neck portion, full-length sizing dies are versatile and suitable for any rifle chambered in the same cartridge.

When you fire a cartridge, the brass case expands to fit the chamber of your rifle. After firing, the case contracts slightly, but it may not return to its original dimensions. The full-length sizing die restores the case to the correct dimensions by resizing both the neck and body. It also removes any bulges or irregularities caused during firing.

Setting up a full-length sizing die involves several steps:
  • Clean the outside of the fired cases with alcohol and a cloth.
  • Zero out the calipers using a headspace comparator and a fired case.
  • Install the full-length sizing die and adjust it gradually until the case shoulder is bumped back by 0.001 inch.
  • Lock the die and lubricate the cases before sizing them.
  • Check the shoulder bump every 10 cases or so and adjust the die if needed.
  • Avoid overworking the brass to prevent case head separation.

Diameter (in):
Item Length (Inches):
4.900
Die Style:
Full Length Sizing Die
Caliber:
Inside Diameter:
Item Weight (lbs):
0.425
Item Width (Inches):
1.600
Cartridge:
22-250 Remington
Model Number:
Item Height (Inches):
1.500

Prop 65 restriction:
Prop 65: WARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.
Shop All ED BROWN

.22-250 Remington Full Length Sizing Die Only

Your Price
$2,299.99 *
Crow # 430109155
MFR # 91037
UPC 734307910372

430109155_1W.jpg
430109155_1W.jpg

Iowa Warehouse
North Carolina Warehouse
Upload FFL Documentation
Something went wrong
The document was updated successfully.