ASSEMBLY/DISASSEMBLY KIT


The 30 tools and bits in the Assembly/Disassembly Kit are basically the same as those in the Basic Starter Kit except that four highly specialized tools have been substituted, making the Kit better equipped for somewhat more advanced professional work. Our decision on the tools is based on the fact that once a person gets started doing some gunsmithing, they quickly discover they are being brought a wider variety of guns than they had anticipated and that certain, seemingly "normal", assembly and disassembly steps can be difficult without the right tools. (This Kit is of paramount value to anyone doing gun rebluing and general repair service.)

Colt handguns will be a part of your living. Whenever you disassemble either large or small frame revolvers, the ejector must be removed from the cylinder prior to polishing, bluing or servicing. The Colt Tool in the Kit makes this otherwise ticklish job quite simple. Plus, the tool makes it easier to remove or install tight 1911 Auto bushings.

The Bolt Extractor Pliers can only be appreciated by one who has fought the removal and installation of a stiff extractor on an Enfield, Springfield, Mauser or similar bolt . . . Especially when your hands are "gunsmith greasy". Comes with illustrated instructions showing how to use when taking them off or putting them on.

Magazine retaining caps on Ithaca 37's, Winchester Model 12's and similar, positively require the special Winchester Model 12 Wrench to remove. Will handle the toughest. Then there is the little 7/64" Speed-Head (Ball End) Socket Wrench. The first time you encounter a scope ring (like on newer Redfields) with Allen head screws on the bottom side of the rings, you will praise this tool for the lifesaver it is.



SPECIFICATIONS:

• 16" Tool Box w/ Tray and Top Storage
• Bolt Extractor Pliers
• #81 Solid MAGNA-TIP Handle Blue
• Nylon/Brass Drift Punch Set
• (3) Replaceable Pin Punch Set w/ 2" Pins
• 2" Pin Punch Assortment
• Winchester Model 12 Forend Wrench
• U.S. Screw Checker Card
• Flat Nose Smooth Jaw Parallel Pliers
• 1/16" and 3/32" Starter Punches
• 1/8" Pin Punch
• 1" Nylon/Brass Hammer
• Mainspring Vise
• 7/64" Ball-Hex "L" Wrench
• Brownells Colt Wrench
• Instrument Screwdriver
  • 2.3mm and 2.9mm
• 8" #2 Cut Hand File
• 60 Degree #2 Cut Sigth Base File
• Gunsmith Bench Knife
• Triangular India Stone
• Double Ended Nylon Parts Cleaning Brush
• Firearms Safety Booklet
• Assembly/ Disassembly Booklet