BASIC GUNSMITHING KIT


The 24 tools (plus 6 additional screwdriver bits) in this Kit are among the ones you will find on the work bench of practically all professional gunsmiths. When we chose each one individually, we walked the aisles of our stock room many times, repeatedly handling each of the vast variety of gunsmithing tools we carry. We had two thoughts in mind as we evaluated each tool: (1) If I were advising a good friend starting to work on guns, is this a tool he should have; and, (2) If I were assembling a compact, economical and basic service tool kit for myself, is this one of the tools I would start with. If the tool met both of these basic requirements, it is in the Kit.

We feel that with the tools in this Kit you can confidently tackle the basic service, cleaning and repair jobs on practically any gun brought to you. The only exceptions would be where special tools are required for specific and complex, advanced procedures. For those jobs you can prepare yourself as you progress. But, this is the Kit you should start with.



SPECIFICATIONS:

• #81 MAGNA-TIP Handle
• Hardened Steel MAGNA-TIP Bits
  • #1, #2, #6, #00, #10, #20, #30
• Nylon/Brass Punch Set
• 6" Needle Nose Pliers
• Replaceable Pin Punch Set of 3 w/ 2" Pins
• U.S. Screw Checker Card
• SAE 9 Piece Hex Wrench Set 5/64" - 1/4"
• Steel Packing Hook/ Scribe
• 2 Instrument Screwdrivers
  • 0.115" and 2.3mm
• Flat Nose Smooth Jaw Parallel Pliers
• Steel Knurled Starter Punches
  • 1/16" and 3/32"
• 1/8" Pin Punch
• 5/32 Pin Punch
• Nylon/Brass Drift Punch Set
• 16" Tool Box w/ Tray and Top Storage
• 1" Nylon/Brass Hammer w/ Hickory Handle
• Mainspring Vise
• #2 Cut Hand File
• 4-in-1 Hand Rasp
• 11" Wide Parts Box
• 60 Degree #2 Sight Base File
• Gunsmith Bench knife
• Triangular India Stone
• Double Ended Nylon Parts Cleaning Brush
• Firearms Safety Booklet
• Gunsmith Basics Starter Booklet