Three special center punches with outside diameters that match the clearance drill size of the most popular sight, rib, and scope base mounting screws. Ground, parallel-sided, 60-degree punches reach through even the thickest handgun rib. The punches are 2.75” long and the body of the punch is 0.250” in diameter. To Use: Level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. hammer. Remove base; drill and tap first hole; re-install base and check positioning. If everything is 'square', re-clamp and finish other holes.
The complete hole center punch set diameters are as follows: #6 = 0.140”, #8 = 0.162”, and #10 = 0.190”
Inside Diameter:
Kit:
Component
Model Number:
#10 - 0.190”
Material:
Steel
Punch Style:
Hole Center
Quantity:
1
Punch Size (Inch):
Shop All ED BROWN
#10 Hole Center Punch Only
Your Price
$2,299.99 *
Crow # 080732010
MFR # #10 HOLE CENTER PUNCH
UPC 050806020085
Iowa Warehouse
North Carolina Warehouse